Home | Tips | Motobins-Tips-Index

• 　K100 Silencer Stuck?
  
  K100 Silencer Stuck? Apply some heat from a blowtorch (having first removed the petrol tank), and then allow some engine oil to soak in for a while. Repeat the procedure, and twist the rear of the silencer, pulling to release the silencer from the pipes. Apply Optimol TA anti-sieze grease before replacing. Replace the clamps in their original positions, and remember to fit the tongues of the clamps into the cut-outs in the silencer stubs before replacement. 
  
  
• 　<Ｋシリーズ　サイレンサーが固着した場合、サイレンサーを根気良く回して、外します。組み立て時には耐熱グリスを塗る>
  

Home | Tips | Motobins-Tips-Index

                 This Home Page is create by Microsoft FrontPage 2000
                 Authorized by wanawana　　　　Update at 2008/02/28