Home | Tips | Motobins-Tips-Index

• 　K-Series Fixed Swinging Arm Pivots
  
  K-Series Fixed Swinging Arm Pivots are usually very tight, and many are damaged during extraction. Carefully use a small blowtorch to warm the gearbox casing around the pivot (having first removed the petrol tank), and lever it out with small tyre levers (BMW ones are ideal). The cause of this problem is usually corrosion on the pivot pin. Remove the corrosion with emery tape before greasing and replacement. 
  
  
  
• 　<Ｋシリーズ　スイングアームピボットの分解方法の注意　温めてから>
  

Home | Tips | Motobins-Tips-Index

                 This Home Page is create by Microsoft FrontPage 2000
                 Authorized by wanawana　　　　Update at 2008/02/28