Home | Tips | Motobins-Tips-Index

• 　K-Series Clutch Release Arms
  
  K-Series Clutch Release Arms pivot on a pair of needle rollers, which are usually attacked by water thrown off the rear wheel. Replacement is easy enough, but prevention is better - drill and tap a hole for a grease nipple in the flat area behind the pivot, and cross- drill a 2mm hole from its base to pick up the pivot bore between the bearings. 
  
  
  
• 　<Ｋシリーズ　クラッチ・リリース・アームのニードル・ローラーのグリスアップについて>

Home | Tips | Motobins-Tips-Index

                 This Home Page is create by Microsoft FrontPage 2000
                 Authorized by wanawana　　　　Update at 2007/06/26