Home | Tips | Motobins-Tips-Index

• 　Can't Get At Your K75/100 Battery?
  
  Can't Get At Your K75/100 Battery? The instructions in the manual are not too good; remove both side panels, and pull out the plastic pin on the offside of the injection unit. Pull the unit out to the nearside, until the multi-pin socket is visible - you will then be able to see the retaining spring clip, and lever it away from the socket, which can then be removed. The plastic tool tray holder can then be pulled out between the frame tubes. 
  
  
  
• 　<Ｋシリーズ　K75/K100のバッテリーの取り外し方>
  

Home | Tips | Motobins-Tips-Index

                 This Home Page is create by Microsoft FrontPage 2000
                 Authorized by wanawana　　　　Update at 2007/06/26